1336-BDB-SP39D PCB栅极驱动板

Description

1336-BDB-SP39D    PCB栅极驱动板

制造商:罗克韦尔自动化
品牌:艾伦-布拉德利
部件号/目录号: 1336-BDB-SP39D
描述:PCB栅极驱动板
电压:460V AC

Allen-Bradley 1336-BDB-SP39D是由罗克韦尔自动化制造的栅极驱动PC板，也称为74101-169-82部件。这个特定的PC板有一个460V交流输入电压，以及250马力的额定值。它可以与1336个具有E帧大小和250 HP输出的驱动器一起使用。每个1336驱动器只能安装一个1336- bdb – sp39d PC板套件。五种一般类型的驱动器可用于1336系列，这些是FORCE, PLUS, PLUS II, CLASSIC和IMPACT驱动器。这些驱动器与额定HP从3到800 HP的交流驱动器兼容，PLUS, PLUS II和CLASSIC驱动器用于要求一般性能的应用，IMPACT和FORCE驱动器用于高性能操作。这些驱动器，包括1336-BDB-SP39D PC板，具有NEMA类型1,4,12典型外壳等级。为了保护驱动器，它配备了各种安全功能，如欠压和过压，输出短路，输出接地故障和电机过载。它们还带有驱动器终端30上的硬件启用，这是一个不可编程的输入。打开该输入将导致1336-BDB-SP39D驱动器中断，并经历一个停止过程，而不是遵循所选择的停止模式。它们还具有UL面板识别，以及用于通信的各种端口，例如增强型DeviceNet端口，DeviceNet端口，RS232/422/485端口，模拟I/O和单点RIO。可用于1336驱动器的人机界面模块(HIM)有模拟，数字，编程和空白HIM。

1336-BDB-SP39D是Allen-Bradley组件，主要被称为PCD栅极驱动板。这是一个1级，主要组装组件，主要用于为驱动器的主板和隔离板提供电源。

该电子元件还通过端子排TB1提供驱动器的终端。该端子组接受460VAC的电源输入，然后通过PCB驱动器的槽式连接进行内部分配，该连接专为带状和跳线电缆设计。这些电缆建立端到端连接到其他电子板，包括主板，隔离板，甚至绝缘栅双极晶体管(IGBT)电路。

在460VAC输入时，这个PCD驱动器设法通过输出连接提供和输出250HP的功率。与此电子元件兼容的驱动器是1336 Plus, Plus II，力和冲击可调频率交流驱动器。这些组件的输出功率为250HP，安装在Frame E驱动器上。框架E驱动是指一系列可调频率的交流驱动器，具有共同的尺寸和重量。这种分组有助于更容易地定义驱动器的物理属性以及输出特性。

每个磁盘只能使用1个1336-BDB-SP39D。根据设计和原理，不可能同时使用两(2)个或更多。该驱动器位于驱动器的底盘和主控板之间。它由专用安装板隔开，这也允许通过将安装板从其安装点上拆卸下来作为一个单元来拆卸该组件。

1336-BDB-SP39D

1336-BDB-SP39D   PCB栅极驱动板

Manufacturer ：Rockwell Automation
Brand ：Allen-Bradley
Part Number/Catalog No. ：1336-BDB-SP39D
Description ：PCB Gate Drive Board
Voltage ：460V AC

The Allen-Bradley 1336-BDB-SP39D is a gate drive PC board manufactured by Rockwell Automation that is also known as the 74101-169-82 part. This specific PC board has a 460V AC input voltage, as well as a 250 HP rating. It can be used with 1336 drives that have an E frame size and 250 HP output. Only one 1336-BDB-SP39D PC board kit can be installed on each 1336 drive. Five general types of drives are available for the 1336 series and these are FORCE, PLUS, PLUS II, CLASSIC, and IMPACT drives. These drives are compatible with AC drives that have HP ratings that range from 3 to 800 HP, with the PLUS, PLUS II, and CLASSIC drives used for applications that require general performance and the IMPACT and FORCE drives for high-performance operations. These drives, including the 1336-BDB-SP39D PC board, have a NEMA Type 1, 4, 12 typical enclosure rating. To protect the drive, it is equipped with various safety features, such as under and over voltage, output short circuits, output ground fault, and motor overload. They also come with a hardware enable found on the drive’s Terminal 30, which is a non-programmable input. Opening this input will result in the interruption of the 1336-BDB-SP39D drive and undergo a coast to stop instead of following the chosen stop mode. They also have a UL panel recognition, as well as various ports for communication, such as Enhanced DeviceNet ports, DeviceNet ports, RS232/422/485 ports, analog I/O, and single-point RIO. Human interface modules (HIM) available for 1336 drives are analog, digital, programmer, and blank HIM.

The 1336-BDB-SP39D is an Allen-Bradley component that is mainly called as a PCD Gate drive board. This is a Level1, Major Assembly component that is primary used to provide power to the drive’s main and isolation boards.

This electronic component also provides the termination of the drive through the terminal block TB1. This terminal block accepts the power supply input of 460VAC which is then internally distributed through the PCB drive’s slotted connections designed for ribbon and jumper cables. These cables establish end to end connection to the other electronic boards which incudes the main board, isolation board and even the Insulated Gate Bipolar Transistor (IGBT) circuit.

At 460VAC input, this PCD driver manages to provide and output power of 250HP through is output connection. Drives that are compatible to use this electronic component are 1336 Plus, Plus II, Force and Impact adjustable Frequency AC drives. Being in the output category of 250HP, these components is installed to a Frame E drive. Frame E drive refers to a range of adjustable frequency AC drives with common dimensions and weight. This grouping helps in easier definition of physical property of the drive as well as the output characteristics.

Use only One (1) 1336-BDB-SP39D per drive. By design and principle, it is impossible to use Two (2) or more at the same time. This drive is located between the chassis of the drive and the main control board. It is separated by its dedicated mounting plate which also allows this component to be removed as a unit by detaching the mounting plate from its installation point.