140CPU67160C 库卡KUKA工业机器人KPS-600/20-ESC伺服电源控制器

Description

140CPU67160C 库卡KUKA工业机器人KPS-600/20-ESC伺服电源控制器

库卡KUKA工业机器人KPS-600/20-ESC伺服电源控制器价格及型号介绍常见维修产品及故障现象：
1.触摸屏、人机界面、控制面板 
常见故障现象有：通电不显示、触摸屏不灵、触摸后鼠标跑偏、面板按键无反应、触摸表面碎裂、花屏、白屏、闪屏及程序等故障维修； 
2.伺服驱动器
常见故障现象有：驱动器报警、无显示、缺相、过流、过压、欠压、过热、过载、接地故障、参数错误、有显示无输出、编码器报警、模块损坏等； 
3.伺服电机(伺服马达) 

 常见故障现象有：1.电机上电、机械振荡(加／减速时) 2.电机上电、机械运动异常快速(飞车) 3.主轴不能定向移动或定向移动不到位 4.出现NC错误报警 5.伺服系统报警 6.编码器报警 7.电机卡死等； 
4.工业电脑、工控主机 
常见故障现象有：开不了机、上电后不工作、开机进不了系统、开机后自动重启或频繁重启、开机跳过系统介面滚动条会黑屏、蓝屏、自动重启或关机； 
5.变频器
常见故障现象有：整流模块损坏、逆变模块损坏、上电无显示、显示过电压或欠电压、显示过电流或接地短路、电源与驱

动板启动显示过电流、空载输出电压正常、带载后显示过载或过电流. 

140CPU67160C 库卡KUKA工业机器人KPS-600/20-ESC伺服电源控制器

KUKA Industrial robot KPS-600/20-ESC servo power controller Price and model Introduction to common maintenance products and fault phenomena:
1. Touch screen, man-machine interface, control panel
Common fault phenomena are: power does not display, touch screen is not working, touch mouse deviation, panel button no response, touch surface fragmentation, flower screen, white screen, flash screen and program fault maintenance;
2. Servo drive
Common fault phenomena are: driver alarm, no display, lack of phase, over current, over voltage, under voltage, overheating, overload, grounding fault, parameter error, display no output, encoder alarm, module damage, etc.
3. Servo motor (servo motor)

Common fault phenomena are: 1. Motor power-on, mechanical oscillation (acceleration/deceleration) 2. Motor power-on, mechanical movement is abnormally fast (speed) 3. The spindle can not move directionally or the directional movement is not in place 4. NC error alarm 5. Servo system alarm 6. Encoder alarm 7. Motor stuck;
4. Industrial computer, industrial control host
Common faults include: failure to turn on the machine, failure to work after power-on, failure to enter the system after startup, automatic restart or frequent restart after startup, skipping the system interface scroll bar, black screen, blue screen, automatic restart or shutdown;
5. Frequency Converter
Common faults include: the rectifier module is damaged, the inverter module is damaged, no power-on display, over voltage or under voltage, over current or ground short circuit, power supply and drive

When the moving plate starts, the overcurrent is displayed, the no-load output voltage is normal, and the overload or overcurrent is displayed after loading.