1756-ENBT Logix Designer应用程序

ControlLogix achieves excellent performance in an easy-to-use environment that can be seen as an industrial model ControlLogix controllers have a storage capacity of up to 32 MB, supporting process-intensive applications and fast motion control applications. You can select different storage capacity controllers based on application requirements. A standard 1 GSD card can be used as removable storage for the program. Multiple processors, various communication modules and I/O can be mixed without restriction. The processor does not need to perform I/O Bridges and routing. As the system grows, the available network distributes control to another rack.
1756-ENBT Usage Instructions The working principle of this circuit is that when the voltage of the two input power supplies is the same (the difference is less than 100mV), G2 controls the two MOSFETs to be switched on at the same time, so that the two inputs provide current to the load at the same time. When the input supply voltage is different, the output supply voltage can be higher than an input supply voltage, then the LTC4416 prevents the output from backing up to the input current. This is because the chip is always monitoring the voltage difference between the input and output. When the voltage on the output side is 25mV higher than the voltage on the input side, the chip controls G1 or G2 to turn off the MOSFET to prevent the current from reversing the current. Other control chips are similar in preventing backflow.

Installed in the ControlLogix framework
Need removable junction box (RTB) Cargo Bulletin 1492 Wiring Interface Module (IFM) for field connection
Event sequence (SOE) The inherent timestamp of the application
Integrated I/O diagnostics to detect system and field failures
It can be inserted and removed (RIUP) for easy maintenance.
Electronic keying helps prevent replacement errors
Module configuration is quick and easy with the I/O wizard Logix Designer application in Studio 5000.
How to control the AB touch screen display through PLC?
Open the ME software to find the global connection, look for the remote display number in the Display TAB, fill in the PLC marker, and assign a value to the marker in the PLC.