1756-L84E ControlLogix控制器

Description

1756-L84E ControlLogix控制器

控制器可安装到任何 1756 机箱插槽中，并使用单个插槽宽度。控制器通过本地 I/O 事件触发器机制执行的任务数量不受限制，编程是使用 Studio 5000 Logix Designer 应用程序版本 3.0 或更高版本实现的。1756-L84E 具有内置 USB 端口，专门用于编程、在线编辑和固件更新，不适用于危险条件。它还具有内置的嵌入式1 GB以太网端口，最多支持250个节点，并在EtherNet / IP网络上提供增强的性能，更广泛的通信和集成的运动控制。该控制器被指定为T4温度代码，并经过IEC测试，可在0-60度下工作。摄氏温度范围，在 5-95% 非冷凝相对湿度限制下不降低额定值。1756-L84E 可以承受 30G 的冲击和 2G 的振动，整个控制器的重量约为 0.394kg。

Allen-Bradley 1756-L84E是一款ControlLogix控制器。该控制器属于具有现代设计和连接的高端控制器。该控制器非常适合大型应用，因为它可用于连接和控制输入和输出设备，特别是128，000个离散输入和输出以及4000个模拟输入和输出。

Allen-Bradley 1756-L84E 是一款 ControlLogix 控制器，使用 Studio 5000 Logix Designer 编程软件进行编程和配置。它支持本地 I/O 控制以及利用一种或多种通信协议（如 EtherNet/IP、ControlNet、DeviceNet、Data Highway Plus、Remote I/O、SynchLink 以及第三方进程和设备网络

）实现分布式 I/O 架构 1756-L84E 带有集成通信端口，如一 （1） 以太网 I/P。该嵌入式端口支持10/100/1000 Mbps的传输速度，可用于通过同一以太网网络内的消息传递指令与人机界面（HMI）、监控和数据采集（SCADA）和其他控制器进行通信。此外，它还具有USB接口，可用于固件修订和控制器参数的初始下载。USB 端口是支持 12 Mbps 通信速度的 USB 2.0。

A-B模块1771-P4R 罗克韦尔 Allen-Bradley 优势

1756-L84E ControlLogix控制器

The controller can be installed into any 1756 chassis slot and uses a single slot width. There is no limit to the number of tasks the controller can perform through the local I/O event trigger mechanism, and programming is implemented using the Studio 5000 Logix Designer application version 3.0 or later. The 1756-L84E has a built-in USB port designed for programming, online editing, and firmware updates, and is not intended for hazardous conditions. It also features a built-in embedded 1 GB EtherNet port that supports up to 250 nodes and provides enhanced performance, broader communication and integrated motion control over EtherNet/IP networks. The controller is specified as a T4 temperature code and is IEC tested to operate at 0-60 degrees. Celsius temperature range, with no reduction in rating at 5-95% non-condensing relative humidity limit. The 1756-L84E can withstand 30G of shock and 2G of vibration, and the weight of the entire controller is about 0.394kg.

The Allen-Bradley 1756-L84E is a ControlLogix controller. The controller is a high-end controller with modern design and connectivity. The controller is ideal for large applications as it can be used to connect and control input and output devices, especially 128,000 discrete inputs and outputs and 4,000 analog inputs and outputs.

The Allen-Bradley 1756-L84E is a ControlLogix controller that is programmed and configured using the Studio 5000 Logix Designer programming software. It supports local I/O control and utilizes one or more communication protocols such as EtherNet/IP, ControlNet, DeviceNet, Data Highway Plus, Remote I/O, SynchLink, and third-party processes and device networks

Implement distributed I/O architecture 1756-L84E with integrated communication ports such as (1) Ethernet I/P. The embedded port supports transfer speeds of 10/100/1000 Mbps and can be used to communicate with Human machine interface (HMI), supervisory control and Data acquisition (SCADA) and other controllers over messaging instructions within the same Ethernet network. In addition, it has a USB interface that can be used for firmware revisions and initial downloads of controller parameters. The USB port is USB 2.0 that supports 12 Mbps communication speed.

A-B Module 1771-P4R Rockwell Allen-Bradley advantage