1783-BMS10CGN 管理型以太网交换机

Description

1783-BMS10CGN 管理型以太网交换机

Allen-Bradley 1783-BMS10CGN是Stratix以太网I/P管理交换机。该以太网交换机共有10个以太网端口，其中8个快速以太网(FE)铜端口和2个千兆以太网(GE)端口。该以太网交换机可用于实现具有更高级别安全性和弹性的工业架构。

它由外部24VDC电源供电，功耗为15瓦@ 24VDC / 40°C(104°F)，最大功耗为20瓦。它的功耗为20瓦。1783-BMS10CGN具有集成报警继电器，触点额定值为1 A @ 30V DC或0.5 A @ 48V DC。

支持千兆以太网(Gigabit Ethernet, GE)的combo端口可安装用于光纤层的SFP (Small Form-factor Pluggable)收发器。它也可以安装1784-SD1，用于保存以太网交换机的配置，方便地将配置转移到其他类似的管理以太网交换机。

对于以太网连接，推荐使用符合IEC 60603-7标准的RJ45连接器和符合TIA 568-B标准的2(2)对或4(4)对5e类最小电缆。1或5类电缆符合ISO/IEC 24702。报警继电器端子信号线推荐线径为0.5 ~ 0.8 mm. sq。或20-18 AWG实心或绞合，UL/ csa额定样式1007或1569双绞线对铜电器布线材料(AWM)线，6.3毫米(0.25英寸)±0.5毫米(0.02英寸)带长度。对于直流电源连接，合适的线尺寸为0.5…0.8 mm平方。或20-18 AWG实心或绞合铜线，绝缘等级为75°C(167°F)或更高，最大绝缘厚度为1.2 mm(3/64英寸)，带长度为6.3 mm(0.25英寸)±0.5 mm(0.02英寸)。

1783-BMS10CGN交换机共有10个端口。其中8个端口是铜(RJ-45)端口，它们支持快速以太网。其中两个端口是组合端口，它们同时支持铜线和光纤连接。combo接口支持的网络速度为千兆以太网。1783-BMS10CGN开关采用开放式外壳，其额定温度为T4北美温度代码。1783-BMS10CGN开关的重量和尺寸分别为3.05磅和5.1 x 3.6 x 5.345英寸。1783-BMS10CGN开关工作于12至48伏直流输入电压之间。开关的电流消耗范围为0.5到2安培。1783-BMS10CGN开关的典型功耗为15瓦，最高可达20瓦。开关能承受的最高环境温度为60摄氏度。在较高的环境温度下，开关性能会下降，也会损坏开关。

1783-BMS10CGN

1783-BMS10CGN 管理型以太网交换机

The Allen-Bradley 1783-BMS10CGN is a Stratix Ethernet I/P managed switch. This ethernet switch features a total of Ten (10) Ethernet ports with Eight (8) Fast Ethernet (FE) Copper ports and Two (2) Gigabit Ethernet (GE) ports. This Ethernet switch may be used for implementing industrial architecture with increased level of security and resiliency.

It is powered by an external 24VDC supply voltage with a power consumption of 15 Watts @ 24V DC/ 40 °C (104 °F) with maximum consumption of 20 Watts. It has a power dissipation of 20 Watts. The 1783-BMS10CGN has an integrated alarm relay with contact rating of 1 A @ 30V DC or 0.5 A @ 48V DC.

The combo ports which supports Gigabit Ethernet (GE) may be installed with Small Form-factor Pluggable (SFP) transceiver, used for fiber-optic layer. It may also be installed with a 1784-SD1, used for saving the ethernet switch’ configuration and convenient transfer of configuration to other similar managed ethernet switch.

For Ethernet connection, recommended wire assembly is RJ45 connector according to IEC 60603-7 and Two (2) or Four (4) pair Category 5e minimum cable according complying to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702. For terminating signal wires to the alarm relay, recommended wire size is 0.5-0.8 mm. sq. or 20-18 AWG solid or stranded, UL/CSA-rated style 1007 or 1569 twisted-pair copper appliance wiring material (AWM) wire, 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.) strip length. For DC power connection, appropriate wire size is 0.5…0.8 mm sq. or 20-18 AWG solid or stranded copper wire with insulation rating of 75 °C (167 °F) or greater, and maximum insulation thickness of 1.2 mm (3/64 in.) with strip length of 6.3 mm (0.25 in.) ±0.5 mm (0.02 in.).

There are a total of 10 ports on the 1783-BMS10CGN switch. Eight of these ports are copper (RJ-45) ports and they support Fast Ethernet. Two of the ports are combo ports and they support both copper and fiber connectivity. The network speed supported by the combo ports is Gigabit Ethernet. The 1783-BMS10CGN switch comes in an open enclosure which is rated with the T4 North American temperature code. The weight and dimensions of the 1783-BMS10CGN switch are 3.05 pounds and 5.1 x 3.6 x 5.345 inches, respectively. The 1783-BMS10CGN switch works with DC input voltages between 12 and 48 Volts DC. The current consumption of the switch ranges from 0.5 to 2 Amps. The typical power consumption of the 1783-BMS10CGN switch is 15 Watts which can go up to a maximum of 20 Watts. The maximum ambient temperature which the switch can tolerate is 60 degrees Celsius. At higher ambient temperatures, the switch performance will degrade and the switch can also be damaged.