239 GE 电机保护继电器 成都阳光熹禾

  • 额定电压:最高可达 690 VAC 。
  • 额定电流:范围从 0.5 A 至 600 A 。
  • 频率:支持 50 Hz 或 60 Hz 。
  • 操作温度范围:从 -40°C 至 +70°C 。
  • 存储温度范围:从 -40°C 至 +85°C 。
  • RTD类型:支持 Pt100、Pt1000、Ni120 。
  • 保护功能:包括过载、欠压、过压、单相运行、接地故障、温度过高等 。
  • 通信接口:RS485 。
  • 协议:Modbus RTU 。
  • 防护等级:IP67
Category:
  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层

Description

产品细节说明:IS200EXHSG3REC GE 工业控制模块

  • 宽电压范围:支持 70-265V AC 的电压输入,适用于不同地区的电网标准和各种电机应用场合,提高了其通用性和灵活性 。
  • 电机保护功能:设计用于监控电机运行状态,提供过载、欠载、堵转、不平衡、接地故障等多种保护功能,有效防止电机损坏 。
  • 可编程性:通常可以通过专用的编程软件(如 239PC)进行配置,允许用户根据实际需求定制保护设置和报警逻辑,提高系统的适应性和智能化水平 。
  • 诊断与通信能力:可能具备故障记录、事件日志和远程通信功能(如通过 MODBUS 或其他工业协议),便于系统维护和故障排查 。
  • 安装简便:设计用于直接安装在控制柜或电机控制中心,减少了安装时间和复杂度 。
  • 保护类型:包括过载、短路、转子锁定、停转/机械卡住、重复启动、单相/不平衡、接地故障、过温、欠电流、断路器故障等
  • 功能:状态/电流/温度显示、故障诊断、跳闸记录、记忆锁定、热容量/负载%/热电阻模拟输出、跳闸/报警/辅助/服务继电器输出、电机运行小时数、上次启动时的电机最大电流、用于现场测试的模拟模式、清晰的 LCD 显示屏、RS485 Modbus 通信接口等

GE-239

产品详情参数 :IS200EXHSG3REC GE 工业控制模块

  • 额定电压:最高可达 690 VAC 。
  • 额定电流:范围从 0.5 A 至 600 A 。
  • 频率:支持 50 Hz 或 60 Hz 。
  • 操作温度范围:从 -40°C 至 +70°C 。
  • 存储温度范围:从 -40°C 至 +85°C 。
  • RTD类型:支持 Pt100、Pt1000、Ni120 。
  • 保护功能:包括过载、欠压、过压、单相运行、接地故障、温度过高等 。
  • 通信接口:RS485 。
  • 协议:Modbus RTU 。
  • 防护等级:IP67

IS200EXHSG3REC GE 应用领域:

这些继电器广泛应用于工业控制、电力系统、石油和天然气、水处理和采矿等领域 。它们不仅能够保护电机免受损害,还能在故障发生前发出警报,帮助诊断问题,并在例行维护期间验证继电器的正确操作GE 239 电机保护继电器广泛应用于工业控制、电力系统、石油和天然气、水处理和采矿等领域,为电机提供必要的电气保护,同时防止因工艺问题导致的常见故障

Product Details: IS200EXHSG3REC GE Industrial Control Module
Wide voltage range: Supports voltage input of 70-265V AC, suitable for different regional power grid standards and various motor applications, improving its versatility and flexibility.
Motor protection function: designed to monitor the operation status of the motor, providing multiple protection functions such as overload, underload, locked rotor, imbalance, and ground fault, effectively preventing motor damage.
Programmable: It can usually be configured through dedicated programming software (such as 239PC), allowing users to customize protection settings and alarm logic according to actual needs, improving the adaptability and intelligence level of the system.
Diagnostic and communication capabilities: May have fault recording, event logging, and remote communication functions (such as through MODBUS or other industrial protocols), facilitating system maintenance and troubleshooting.
Easy installation: Designed for direct installation in control cabinets or motor control centers, reducing installation time and complexity.
Protection types: including overload, short circuit, rotor lock, stall/mechanical jam, repeated start, single-phase/unbalanced, ground fault, over temperature, under current, circuit breaker fault, etc
Function: Status/current/temperature display, fault diagnosis, trip record, memory lock, thermal capacity/load%/thermal resistance analog output, trip/alarm/auxiliary/service relay output, motor operating hours, maximum motor current at last start, simulation mode for on-site testing, clear LCD display screen, RS485 Modbus communication interface, etc
Product Details and Parameters: IS200EXHSG3REC GE Industrial Control Module
Rated voltage: up to 690 VAC.
Rated current: ranging from 0.5 A to 600 A.
Frequency: Supports 50 Hz or 60 Hz.
Operating temperature range: from -40 ° C to+70 ° C.
Storage temperature range: from -40 ° C to+85 ° C.
RTD type: Supports Pt100, Pt1000, Ni120.
Protection functions: including overload, undervoltage, overvoltage, single-phase operation, ground fault, high temperature, etc.
Communication interface: RS485.
Protocol: Modbus RTU.
Protection level: IP67

IS200EXHSG3REC GE application areas:

These relays are widely used in fields such as industrial control, power systems, oil and gas, water treatment, and mining. They can not only protect motors from damage, but also issue alarms before faults occur, help diagnose problems, and verify the correct operation of relays during routine maintenance. GE 239 motor protection relays are widely used in industrial control, power systems, oil and gas, water treatment, mining and other fields, providing necessary electrical protection for motors while preventing common faults caused by process issues

其他型号推荐:IS200EXHSG3REC GE 工业控制模块

GE/T-RON 516TX | 336A4940DNP516TX | SWIT GE/T-RON 516TX | 336A4940DNP516TX | SWITCH 16 PORTS
GE IS420ESWBH3AX Mark VIe Industrial Eth GE IS420ESWBH3AX Mark VIe Industrial Ethernet Switch /IONet
GE Multilin 369 | 369-HI-R-0-0-0 | Motor GE Multilin 369 | 369-HI-R-0-0-0 | Motor Management Relay
GE Multilin 369-HI-0-M-F-E-0 Motor manag GE Multilin 369-HI-0-M-F-E-0 Motor management relay
GE 369-C101 | Multilin Lower Control Boa GE 369-C101 | Multilin Lower Control Board | 1753-0005
GE 369-C100 PCB | 1253-0002-C2 | Multili GE 369-C100 PCB | 1253-0002-C2 | Multilin Upper Control
GE 369-P300 POWER SUPPLY BRD | 1253-0001 GE 369-P300 POWER SUPPLY BRD | 1253-0001
GE Multilin 369-A200 | Analog & I/O GE Multilin 369-A200 | Analog & I/O Board | 1253-0003/1753-0003/840501
Ge Multilin 269 | 269PLUS-D/O-261-100P-1 Ge Multilin 269 | 269PLUS-D/O-261-100P-120 | Motore Gestione Relè
GE Multilin 269 | 269-PLUS-D/O-100P-125V GE Multilin 269 | 269-PLUS-D/O-100P-125V | protective relay unit
GE 12HGA11J52 | Auxilary Relay | Type HG GE 12HGA11J52 | Auxilary Relay | Type HGA
GE 12A0-0103-A3 | UR 100MBPS ETHERNET | GE 12A0-0103-A3 | UR 100MBPS ETHERNET | Industrial control module
GE 104X905BA603 | G-95-149-H-9550 | OPER GE 104X905BA603 | G-95-149-H-9550 | OPERATOR CONTROL PANEL
GE FANUC | GQPI2D100L2P-A | 0880001-01 | GE FANUC | GQPI2D100L2P-A | 0880001-01 | OPERATOR PANEL
GE FANUC IC693CPU372-AE | IC693CPU372 | GE FANUC IC693CPU372-AE | IC693CPU372 | CPU372 MODULE
GE IS420UCSCH2A-C | IS420UCSCH2A | Dual GE IS420UCSCH2A-C | IS420UCSCH2A | Dual Core Mark VIe Controller
GE IS230STAOH2A | MKVIe | TERMINAL BOARD GE IS230STAOH2A | MKVIe | TERMINAL BOARD
GE IS230TNSVH3A | Gas turbine card GE IS230TNSVH3A | Gas turbine card
GE IS215UCVHM06A | IS415UCVHH1A | VET2-A GE IS215UCVHM06A | IS415UCVHH1A | VET2-A21010 350-9300007672-12F010A1
GE IC697CPM791-FD CPU Halt production GE IC697CPM791-FD CPU Halt production
  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层