330103-040-00-00 电涡流传感器配套延伸电缆

Description

330103-040-00-00 电涡流传感器配套延伸电缆

330103-040-00-00是一款电涡流传感器配套，延伸电缆主要用于连接和扩展探头与前置器之间的距离。这种电缆的选择和使用对于确保电涡流传感器的正常工作和精确测量至关重要。

首先，330103-040-00-00的长度应根据实际需求进行选择，确保延伸电缆长度加上探头电缆长度与前置器所要求的长度一致。这有助于避免电缆过长或过短导致的测量误差或其他问题。

其次，对于是否需要采用带铠装的延伸电缆，应根据实际使用环境进行判断。如果电缆铺设在无管道保护的环境中，建议选择带铠装的延伸电缆，以增强电缆的抗折弯和耐磨性能，防止电缆损坏。而在有管道保护的情况下，可以采用不带铠装的延伸电缆。

此外，延伸电缆的铺设和固定也需要注意。过长的电缆应避免随意剪断或加长，而应盘成直径不小于50mm的圆形并用绑带扎紧，然后用压片固定。这样可以防止电缆因过长而导致的传感器系统特性变化。

最后，330103-040-00-00的转接头防护与绝缘也是不可忽视的。延伸电缆的外表皮和探头内部结构应已绝缘，但转接头金属表面通常是裸露的。为了避免转接头与机壳接触以及加强其防护性，延伸电缆与探头电缆相联的一端应带有绝缘保护套。

综上所述，正确选择和使用电涡流传感器配套的延伸电缆，对于确保传感器的正常工作和精确测量具有重要意义。如需更多关于电涡流传感器延伸电缆的信息，建议查阅相关领域的专业书籍或咨询相关技术人员。

330103-040-00-00 电涡流传感器配套延伸电缆

The 330103-040-00-00 is an eddy current sensor package with an extension cable primarily used to connect and extend the distance between the probe and the preprocessor. The selection and use of this cable is essential to ensure the proper operation and accurate measurement of the eddy current sensor.

First of all, the length of 330103-040-00-00 should be selected according to the actual needs to ensure that the extension cable length plus the probe cable length is consistent with the length required by the preprocessor. This helps to avoid measurement errors or other problems caused by too long or too short a cable.

Secondly, for the need to use armored extension cables, should be judged according to the actual use of the environment. If the cables are laid in an environment without pipe protection, it is recommended to use armored extension cables to enhance the bending and wear resistance of the cables and prevent cable damage. In the case of pipeline protection, extension cables without armor can be used.

In addition, the laying and fixing of extension cables also need attention. The excessively long cable should not be cut or extended at will, but should be coiled into a circle with a diameter of not less than 50mm and tied tightly with a binding tape, and then fixed with a press sheet. This prevents changes in the characteristics of the sensor system caused by excessive length of the cable.

Finally, the adapter protection and insulation of 330103-040-00-00 can not be ignored. The outer skin of the extension cable and the internal structure of the probe should be insulated, but the metal surface of the adapter is usually exposed. In order to avoid contact between the adapter and the housing and enhance its protection, the end of the extension cable connected to the probe cable should be equipped with an insulating protective sleeve.

To sum up, the correct selection and use of the extension cable supporting the eddy current sensor is of great significance to ensure the normal operation and accurate measurement of the sensor. For more information about eddy current sensor extension cables, it is recommended to consult professional books in the relevant field or consult relevant technicians.