350032M 4通道继电器模块是一个全高模块

描述

350032M 4通道继电器模块是一个全高模块

350032M BENTLY技术规格

I 3500/32M需要3500个机架配置软件,版本4.5或以后再说。

I 3500/32M需要3500个数据采集软件,版本2 .40或以后再说。

I 3500/32M需要3500个数据显示软件,版本1 .40或更高版本。

1与3500/93 LCD显示器起使用时模块， 3500/93将需要固件版本P或更高版本。

1与3500/94 VGA显示器-起使用时模块，3500/94将需要固件版本C或更高版本。

4通道继电器模块是一个全高模块， 它提供四个继电器输出。任意数量的4通道继电器模块可以放置在右侧的任何插槽中瞬态数据接口模块。4通道的每个输出继电器模块可以独立编程执行投票逻辑。4通道继电器模块上使用的每个继电器包括报警驱动逻辑。报警驱动逻辑的编程使用AND和or逻辑，并且可以使用报警输入(警报和危险状态)，不正常,或来自任何监控通道或任何机架中监视器通道的组合。你可以编程这种报警驱动满足您的应田乏求庙田2500年力2罢地件

350032M 4通道继电器模块是一个全高模块

350032M BENTLY technical specifications

I 3500/32M requires 3500 rack configuration software, version 4.5 or later.

I 3500/32M requires 3500 data acquisition software, version 2.40 or later.

I 3500/32M requires 3500 data display software, version 1.40 or later.

1 When the module is used with a 3500/93 LCD display, 3500/93 will require firmware version P or later.

1 With a 3500/94 VGA display – when starting to use the module, 3500/94 will require firmware version C or later.

The 4-channel relay module is a full-height module that provides four relay outputs. Any number of 4-channel relay modules can be placed in any slot on the right of the transient data interface module. Each of the 4-channel output relay modules can be programmed independently to perform voting logic. Each relay used on the 4-channel relay module includes alarm drive logic. The alarm driver logic is programmed using AND and or logic, and can use a combination of alarm inputs (alarm and danger status), abnormal, or from any monitoring channel or monitor channel in any rack. You can program this alarm driver to meet your response field 2500 force 2 strike pieces