5X00226G02 ControlLogix控制器

Description

5X00226G02 ControlLogix控制器

5X00226G02 ControlLogix控制器

ControlLogix Controllers :ControlLogix sets a new standard for PLC performance and performance in the required easy-to-use environment. The Controllogix controller, when combined with storage units of optional capacity, can support complex operations, except for sequential control. Outside of process control, and can provide fast motion control. The processor is modular, allowing the selection of different processors with various storage unit specifications depending on the specific application. A wide variety of controllers, communication modules and I/O modules can be combined without restriction.
Fatek PIC has special NC positioning language, single four-axis high-speed pulse output, high frequency up to 920KHz, with multi-axis simultaneous motion and linear interpolation functions
Fatek PIC has powerful communication function, high communication rate up to 921.6KHz, support Modbus, self-use communication protocol and other common data communication protocols, arbitrary configuration of common RS-232 and RS-485 communication expansion port. Fatek PLC easy to understand instruction set, can be simple and convenient to complete the PLC host and other equipment communication.
3. Design of control system
3.1 Hardware Configuration
The host model is FBs-40MCT+FBs-8YT, the touch screen is FT-070ST-T41R, and other equipment such as solenoid valve, photoelectric switch and co-service motor must be purchased. The following is the control system structure diagram of the device (Figure 1).
Because the position of the tube shape in space is more complicated, it is difficult to deduce the straight shape of the tube shape by describing the coordinate of the working point. In this case, the data used by the pipe bender is not coordinate point data, but special PRB data for the pipe bender. Therefore, the coordinate point data stored in the computer memory must also go through a series of vector operations to calculate the PRB data required by the bending machine.
7. Equipment operation
After the debugging of the equipment, the customer carried out a period of use test on the pipe bender. The equipment can complete the bending pipe products produced by various technological processes according to the control effect of customers to reach a higher technological level.

8. Application experience
Through this project, I learned the advantages of FATEK PLC in high-speed counting and high-speed pulse. Fatek PLC’s powerful instruction set makes programming more user-friendly and easy to understand. Table Settings make the operation easier, using the register table in the project, using this table as a wizard to set the high-speed pulse instruction related data, making the operation process easier. High hardware reliability, in the operation of the equipment, the PLC continued to run, no abnormalities, customers on FateK product hardware performance affirmed.