9907-023 输出I/O模块

Description

9907-023 输出I/O模块

技术描述：

2301A速度控制控制柴油或燃气发动机，或蒸汽或燃气轮机的速度或负载。
这些动力源在本手册中被称为“原动机”。

控制装置安装在一个金属板底盘上，由一块印刷电路板组成。
所有的电位器都可以从机箱的前面进入。

在2301A速度控制提供控制在等时模式与下垂可通过外部连线电位器。

等时模式用于控制原动机的恒定速度，只要它能够提供负载。当与Woodward负载传感器共享负载时，也使用等时传感器。外部下垂用于速度控制，作为负载的函数，当一个素数原动机在无限母线上运行，或两个或多个原动机并联运行。

用于原动机的2301A系统包括:
2301A电子调速装置，外部电源，测速装置(MPU)，
比例致动器，用于定位燃油或蒸汽计量装置。

9907-023 输出I/O模块

Technical description:

2301A Speed control Controls the speed or load of a diesel or gas engine, or a steam or gas turbine.
These power sources are referred to in this manual as “prime movers.”

The control unit is mounted on a metal plate chassis and consists of a printed circuit board.
All potentiometers can be accessed from the front of the case.

The 2301A speed control provides control in isochronous mode with droop available via an externally wired potentiometer.

Isochronous mode is used to control the constant speed of the prime mover as long as it can provide load. Isochronous sensors are also used when the load is shared with Woodward load sensors. External droop is used for speed control, as a function of load, when a prime prime mover is running on an infinite bus, or two or more prime movers are running in parallel.

2301A systems for prime movers include:
2301A Electronic speed regulating device, External power supply, Speed measuring device (MPU),
Proportional actuator for positioning fuel or steam metering devices.