ACR1000A-R2 系列光纤KVM延长器

Description

ACR1000A-R2 系列光纤KVM延长器

产品特点
提供完美的数字视频，不丢帧。
无损压缩，减少带宽的使用，同时很好地提高用户体验。
IP over CATx可达330英尺（100米）基于KVM延长；若使用网络交换机可传输的更远。

产品详情
CATx / SFP链路接口选择提供链路媒体（CATx或光纤）以及热冗余或带宽聚合的灵活性。
通过直接CATx链路可达100米，通过光纤10千米或使用标准网络无限制。
支持DVI-D视频，USB HID，USB 2.0，串行和双向模拟音频。
在单链路DVI（1920×1200），双头DVI（2x 1920×1200 / 1080p）和双链路DVI（2560×1600 / 2kx2k）版本之间进行选择。
无损压缩，低延迟，像素级完美的视频传输和KVM控制。
用于K / M和其他标准USB HID（如触摸屏或闪存驱动器）的USB仿真。
完全无风扇，零噪声运行。
ACR1012A-T通过VNC向附加的计算机提供通过VNC的带外访问，直到BIOS级别。
即插即用安装。
从点对点KVM扩展开始，并使用iPath控制器轻松迁移到KVM矩阵切换。

ACR1000A-R2

ACR1000A-R2 系列光纤KVM延长器

Product characteristics
Provides perfect digital video without losing frames.
Lossless compression reduces bandwidth usage while well improving user experience.
IP over CATx can be extended up to 330 feet (100 m) based on KVM; If you use a network switch, you can transmit further.

Product details
CATx/SFP Link interface options provide flexibility for link media (CATx or fiber) as well as thermal redundancy or bandwidth aggregation.
Up to 100m via direct CATx link, 10km via fibre or unlimited using standard networks.
Supports DVI-D video, USB HID, USB 2.0, serial and bidirectional analog audio.
Choose between single-link DVI (1920×1200), dual-head DVI (2x 1920×1200/1080p), and dual-link DVI (2560×1600/2kx2k) versions.
Lossless compression, low latency, pixel-level perfect for video transfer and KVM control.
USB emulation for K/M and other standard USB HID, such as touch screens or flash drives.
Completely fanless, zero noise operation.
ACR1012A-T provides out-of-band access via VNC to attached computers up to the BIOS level via VNC.
Plug and play installation.
Start with point-to-point KVM scaling and easily migrate to KVM matrix switching with an iPath controller.