C7012E1104 Honeywell 紫外型火焰探测器

Description

C7012E1104 Honeywell 紫外型火焰探测器

C7012E1104 是霍尼韦尔（Honeywell）公司生产的一款紫外型火焰探测器。这款产品主要用于监测和控制火灾风险，广泛应用于各种工业、商业和家庭环境中。

具体来说，C7012E1104 火焰探测器采用了紫外型传感器，能够检测火焰发出的紫外线辐射。当探测到火焰时，传感器会立即发出信号，触发报警系统或自动灭火设备，从而实现对火灾的快速响应和控制。

此外，C7012E1104 火焰探测器还具有多种特点和优势。例如，它采用了高灵敏度的传感器，能够快速、准确地检测火焰；同时，它还具有抗干扰能力强、误报率低等优点，能够在各种复杂环境下稳定运行。

在实际应用中，C7012E1104 火焰探测器通常被安装在可能存在火灾风险的场所，如工厂、仓库、商场、酒店等。通过与报警系统、自动灭火设备等联动，能够实现对火灾的快速响应和控制，从而保障人员安全和生产顺利进行。

需要注意的是，具体的产品信息和应用场景可能因不同的需求和配置而有所不同。因此，在实际应用中，建议查阅相关的技术文档、产品手册或联系制造商的技术支持部门以获取更准确和详细的信息。同时，在安装和使用过程中，应遵循相关的安全规范和操作指南，确保产品的正常运行和使用效果。

C7012E1104 Honeywell 紫外型火焰探测器

The C7012E1104 is an ultraviolet type flame detector manufactured by Honeywell. This product is primarily used to monitor and control fire risk in a wide range of industrial, commercial and domestic environments.

Specifically, the C7012E1104 flame detector uses an ultraviolet-type sensor that detects the ultraviolet radiation emitted by the flame. When a flame is detected, the sensor immediately sends out a signal, triggering an alarm system or automatic fire extinguishing equipment, thus achieving a rapid response and control of the fire.

In addition, the C7012E1104 flame detector has several features and advantages. For example, it uses highly sensitive sensors to detect flames quickly and accurately; At the same time, it also has the advantages of strong anti-interference ability, low false alarm rate, and can run stably in various complex environments.

In practical applications, the C7012E1104 flame detector is usually installed in places where there may be fire risks, such as factories, warehouses, shopping malls, hotels, etc. Through the linkage with the alarm system and automatic fire extinguishing equipment, the rapid response and control of the fire can be realized, so as to ensure the safety of personnel and the smooth progress of production.

It is important to note that specific product information and application scenarios may vary for different requirements and configurations. Therefore, in practical applications, it is recommended to consult the relevant technical documentation, product manuals or contact the manufacturer’s technical support department for more accurate and detailed information. At the same time, during the installation and use, the relevant safety specifications and operating guidelines should be followed to ensure the normal operation and use of the product.