DLS-C30 距离测量仪器

Description

DLS-C30 距离测量仪器

DLS-C(H)和FLS-C(H)是集成到工业应用中的功能强大的距离测量仪器。它们允许使用激光束的反射在大范围内进行精确和非接触式距离测量

主要特点

•与DIMETIX DLS-C(H)激光距离传感器兼容
•测量范围0.05 ~ 500m
•串行接口(RS232和RS422)
•SSI接口(仅限FLS-C(H))
•在一条RS422线上连接多达10个模块
•宽范围电源(9…30VDC)，加热选项(24…30VDC)
•可编程模拟输出(0/4…20mA)
•两个可编程数字输出(DO1和DO2)
•错误信号(DOE)的数字输出
•一个可编程数字输入(DI1)
•控制外部显示器的ASCII协议
•D-Sub连接器和螺钉端子接头，方便连接DLS-C(H) / FLS-C(H)
•IP65(防止灰尘和水的进入)
•4个led用于状态信令
•补充配置软件可在Dimetix网站
•可选:内部加热器，模块工作温度可低至-40°C
•II级激光(<0.95mW)
•配件，方便使用的传感器

DLS-C30

DLS-C30 距离测量仪器

The DLS-C(H) and FLS-C(H) are powerful distance-measuring instruments for integration into industrial applications. They allow accurate andcontactless distance measurement over a wide range using the reflection of a laser beam

Key features
• Compatible with DIMETIX DLS-C(H) Laser Distance Sensor
• Measurement range 0.05 to 500 m
• Serial interface (RS232 and RS422)
• SSI interface (FLS-C(H) only)
• Connection of up to 10 modules on a single RS422 line
• Wide range power supply (9…30VDC), heating option (24…30VDC)
• Programmable analog output (0/4…20mA)
• Two programmable digital outputs (DO1 and DO2)
• Digital output for error signalization (DOE)
• One programmable digital input (DI1)
• ASCII protocol to control external displays
• D-Sub connector and screw terminal joint for easy connection of DLS-C(H) / FLS-C(H)
• IP65 (protected against ingress of dust and water)
• 4 LEDs for status signaling
• Complementary configuration software available at Dimetix web site
• Optional: Internal heater for module operation down to -40°C
• Laser class II (<0.95mW)
• Accessories for easy use of the sensor