DS200ADGIH1AAA  设计用于安装在变频器的机柜中

GE辅助接口板DS200ADGIH1AAA具有一个40针连接器、60跳线和一个6针连接器。GE辅助接口板DS200ADGIH1AAA也装有多个测试点。这块木板有8英寸宽。DS200ADGIH1AAA长6英寸,设计用于安装在变频器的机柜中。它有四个螺钉,它们与板架上的一个位置对齐,以便用螺钉安装。
测试点提供了一种测试电路板上电路的方法。但是,只有合格的维修人员才能测试主板。服务人员必须拥有为该任务而校准和设计的测试设备。控制装置必须正确设置,探头必须设计为与测试仪一起使用。将电路板放在平坦的表面上,并在电路板下放置一个保护袋。
Categories: ,
  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层

Description

DS200ADGIH1AAA  设计用于安装在变频器的机柜中

GE辅助接口板DS200ADGIH1AAA具有一个40针连接器、60跳线和一个6针连接器。GE辅助接口板DS200ADGIH1AAA也装有多个测试点。这块木板有8英寸宽。DS200ADGIH1AAA长6英寸,设计用于安装在变频器的机柜中。它有四个螺钉,它们与板架上的一个位置对齐,以便用螺钉安装。
测试点提供了一种测试电路板上电路的方法。但是,只有合格的维修人员才能测试主板。服务人员必须拥有为该任务而校准和设计的测试设备。控制装置必须正确设置,探头必须设计为与测试仪一起使用。将电路板放在平坦的表面上,并在电路板下放置一个保护袋。
此外,由于静电风险,维修人员必须始终佩戴腕带。正确安装腕带后,腕带的一端系在您的手腕上,另一端夹在工作台或书桌的金属腿上。它也可以连接到其他金属结构上。静电被吸引到金属地面,并离开电路板或您的身体。
减少静电积累的另一个适当的步骤是,在将电路板握在手中时,避免四处移动。行走的摩擦导致静电积聚。在凉爽干燥的天气条件下尤其如此。如果没有腕带,您也可以将装有冲浪板的静电包接触到金属结构,如椅子或金属桌腿。

DS200ADGIH1AAA  设计用于安装在变频器的机柜中

The GE auxiliary interface board DS200ADGIH1AAA has a 40-pin connector, 60-pin jumper, and a 6-pin connector. The GE auxiliary interface board DS200ADGIH1AAA is also equipped with multiple test points. The board is eight inches wide. The DS200ADGIH1AAA is 6 inches long and is designed to be installed in the inverter cabinet. It has four screws, which are aligned with a position on the board frame for mounting with screws.
A test point provides a method for testing a circuit on a board. However, only qualified maintenance personnel can test the motherboard. Service personnel must have test equipment calibrated and designed for the task. The control device must be set up correctly and the probe must be designed for use with the tester. Place the board on a flat surface and place a protective bag under the board.
In addition, due to the risk of static electricity, maintenance personnel must always wear wristbands. When the wristband is properly installed, one end of the wristband is tied around your wrist and the other end is clipped to the metal leg of your workbench or desk. It can also be attached to other metal structures. Static electricity is attracted to the metal floor and leaves the circuit board or your body.
Another appropriate step to reduce the buildup of static electricity is to avoid moving the board around while holding it in your hand. The friction of walking causes static electricity to build up. This is especially true in cool, dry weather conditions. If you don’t have a wristband, you can also touch the static bag containing the surfboard to a metal structure, such as a chair or metal table leg.
  • 购买咨询热线/Phone:18859254943
  • 邮箱/Email:sales@ygdcs.com
  • 地址:成都高新区天益街北巷52号附14号2层