DS200CTBAG1ADD 转换模块

Description

DS200CTBAG1ADD 转换模块

DS200CTBAG1ADD是一款专为GE Mark V Speedtronic系统设计的接线板。Speedtronic系列是由通用电气公司创建的，主要用于控制大型和小型燃气轮机和蒸汽轮机系统。

DS200CTBAG1ADD是一款模拟终端模块，通常位于<R5>核心内。这款接线板是一个狭长的电路板，上面只有几种类型的组件。它的每个角和长边都有钻孔，以便于安装硬件和其他连接。其中两个钻孔周围环绕着导电材料。此外，DS200CTBAG1ADD有多个连接器，包括两个COREBUS连接器（JAI和JAJ），以及两个双层端子排，每个端子排上有多个连接器。还有五个垂直针电缆连接器、两个垂直针头连接器和一个9针公串行连接器。

此外，DS200CTBAG1ADD也被视为GE的转换模块之一，主要应用于电力发电、输电和配电等环节，以实现对电力设备和系统的控制和保护。

需要注意的是，虽然这款接线板具有多种功能和特点，但由于其专用性和复杂性，建议在选择和使用时进行充分的调研和测试，以确保其适用于特定的应用场景，并遵循相关的安装、调试和维护规范。同时，对于接线板等硬件设备的操作和维护，需要具备一定的技术知识和经验，建议由专业人员进行。

DS200CTBAG1ADD 转换模块

The DS200CTBAG1ADD is a patch board designed for GE Mark V Speedtronic systems. The Speedtronic family was created by General Electric to control large and small gas and steam turbine systems.

The DS200CTBAG1ADD is an analog terminal module, typically located within the <R5> core. The patch board is a long, narrow circuit board with only a few types of components on it. It has holes drilled into each corner and long side for easy installation of hardware and other connections. Two of the holes are surrounded by conductive material. In addition, the DS200CTBAG1ADD has multiple connectors, including two COREBUS connectors (JAI and JAJ), and two double-layer terminal blocks with multiple connectors on each terminal block. There are also five vertical needle cable connectors, two vertical needle connectors, and a 9-pin male serial connector.

In addition, DS200CTBAG1ADD is also regarded as one of GE’s conversion modules, which is mainly used in power generation, transmission and distribution, etc., to realize the control and protection of power equipment and systems.

It should be noted that although this patch board has a variety of functions and features, due to its specificity and complexity, it is recommended to conduct sufficient research and testing during selection and use to ensure that it is suitable for specific application scenarios and follows the relevant installation, commissioning and maintenance specifications. In addition, professional personnel are required to operate and maintain hardware devices, such as patch boards, only after having certain technical knowledge and experience.