DS200CTBAG1ADD 高性能控制模块

Description

DS200CTBAG1ADD 高性能控制模块

DS200CTBAG1ADD是一款专为GE Mark V Speedtronic系统设计的接线板。Speedtronic系列是由通用电气公司创建的，主要用于控制大型和小型燃气轮机和蒸汽轮机系统。尽管MKV可以设计为采用单工或TMR/三重模块化冗余架构，以满足相连涡轮机系统的需求，但这些电路板不再由GE制造和分销。然而，它们可以作为经过全面测试和翻新的型号通过AX Control购买。

DS200CTBAG1ADD是一款狭长的电路板，上面只有几种类型的组件。它的每个角和长边都有钻孔，以便安装硬件和其他连接。其中两个钻孔周围环绕着导电材料。电路板标有识别码，包括电路板ID号和公司徽标。此外，DS200CTBAG1ADD是一个模拟终端模块，通常位于<R5>核心内。

该板具有多个连接器，包括两个COREBUS连接器（JAI和JAJ）。此外，它还有两个双层端子排，位于一个长板边缘，每个端子排上有多个连接器。同时，还有五个垂直针电缆连接器、两个垂直针头连接器和一个9针公串行连接器。

DS200CTBAG1ADD上的其他组件包括电阻网络阵列、继电器、晶体管、二十多个金属氧化物变阻器（MOV）、十几个跳线开关，以及许多电容器和电阻器。

此外，DS200CTBAG1ADD也广泛应用于电力发电、输电和配电等环节，实现对电力设备和系统的控制和保护。

在选择和使用DS200CTBAG1ADD或其他电子组件时，建议从可靠的来源获取准确的信息，并遵循制造商的指导和建议。

DS200CTBAG1ADD 高性能控制模块

The DS200CTBAG1ADD is a patch board designed for GE Mark V Speedtronic systems. The Speedtronic family was created by General Electric to control large and small gas and steam turbine systems. Although MKV can be designed with simplex or TMR/ triple modular redundancy architecture to meet the needs of connected turbine systems, these boards are no longer manufactured and distributed by GE. However, they can be purchased through AX Control as fully tested and refurbished models.

The DS200CTBAG1ADD is a long, narrow circuit board with only a few types of components on it. It has holes drilled into each corner and long side to allow for the installation of hardware and other connections. Two of the holes are surrounded by conductive material. The board is marked with an identification number, including the board ID number and the company logo. In addition, the DS200CTBAG1ADD is an analog terminal module, usually located within the <R5> core.

The board has multiple connectors, including two COREBUS connectors (JAI and JAJ). In addition, it has two double-layer terminal blocks located on the edge of a long board with multiple connectors on each terminal block. There are also five vertical needle cable connectors, two vertical needle connectors, and a 9-pin male serial connector.

Other components on the DS200CTBAG1ADD include a resistor network array, relays, transistors, more than two dozen metal oxide rheostat (MOV), a dozen jumper switches, and many capacitors and resistors.

In addition, DS200CTBAG1ADD is also widely used in power generation, transmission and distribution, etc., to achieve the control and protection of power equipment and systems.

When selecting and using the DS200CTBAG1ADD or other electronic components, it is recommended to obtain accurate information from reliable sources and follow the manufacturer’s guidance and recommendations.