ELAU-MC-41110400 主要应用于高精度的定位系统

Description

ELAU-MC-41110400 主要应用于高精度的定位系统

伺服驱动器（servo drives）又称为“伺服控制器”、“伺服放大器”，ELAU-MC-41110400是用来控制伺服电机的一种控制器，其作用类似于变频器作用于普通交流马达，属于伺服系统的一部分，主要应用于高精度的定位系统。

伺服驱动器通常通过位置、速度和力矩三种方式对伺服电机进行控制，实现高精度的传动系统定位，是传动技术的高端产品。伺服驱动器是由电路板、微芯片、电线和连接器制成的电子设备，可以连接到电机上，控制电机的旋转，使电机加速、减速、停止，甚至随时倒退。伺服驱动器通过控制和引导电机电线的电流来实现这些功能。

伺服驱动器是现代运动控制的重要组成部分，被广泛应用于工业机器人及数控加工中心等自动化设备中。尤其是应用于控制交流永磁同步电机的伺服驱动器已经成为国内外研究热点。当前交流伺服驱动器设计中普遍采用基于矢量控制的电流、速度、位置3闭环控制算法。该算法中速度闭环设计合理与否，对于整个伺服控制系统，特别是速度控制性能的发挥起到关键作用。

伺服驱动器具有数分钟甚至半小时内1.5倍以上的过载能力，ELAU-MC-41110400在短时间内可以过载4～6倍而不损坏。此外，伺服驱动器具有高可靠性，要求数控机床的进给驱动系统可靠性高、工作稳定性好，具有较强的温度、湿度、振动等环境适应能力和很强的抗干扰的能力。

ELAU-MC-41110400 主要应用于高精度的定位系统

servo drives (servo drives) is also known as “servo controller”, “servo amplifier”, ELAU-MC-41110400 is used to control a servo motor controller, its role is similar to the frequency converter acting on the ordinary AC motor, is a part of the servo system, mainly used in high-precision positioning system.

Servo drive usually through the position, speed and torque three ways to control the servo motor, to achieve high-precision transmission system positioning, is a high-end product of transmission technology. Servo drivers are electronic devices made of circuit boards, microchips, wires, and connectors that can be connected to a motor and control its rotation, making it accelerate, slow down, stop, or even go backwards at any time. The servo driver performs these functions by controlling and directing the current of the motor wires.

Servo drive is an important part of modern motion control, which is widely used in industrial robots and CNC machining centers and other automation equipment. In particular, the servo drive used to control AC permanent magnet synchronous motor has become a research hotspot at home and abroad. The current, speed and position-3 closed-loop control algorithm based on vector control is widely used in the design of AC servo drivers. Whether the speed closed-loop design in this algorithm is reasonable or not plays a key role in the whole servo control system, especially in the performance of speed control.

The servo drive has an overload capacity of more than 1.5 times for a few minutes or even half an hour, and the ELAU-MC-41110400 can overload 4 to 6 times in a short period of time without damage. In addition, the servo drive has high reliability, which requires the feed drive system of the CNC machine tool to have high reliability, good working stability, and strong adaptability to the environment such as temperature, humidity, vibration and strong anti-interference ability.