IC693BEM330 支持I厂仪器协议(FIP)的远程I/O扫描仪模块

Description

IC693BEM330 支持I厂仪器协议(FIP)的远程I/O扫描仪模块

IC693BEM330是一款支持I厂仪器协议(FIP)的远程I/O扫描仪模块。该模块属于90-30系列可编程逻辑控制器(PLC ),以前由GE Fanuc制造，现在属于艾默生自动化。它主要用于实现分布式I/O架构，使用户能够与远离主机控制器的I/O模块进行通信。该模块支持FIP l/O协议，支持1 MHz的数据传输速率。它配有两(2)个FIP通道，由9针D型外壳母连接器提供。它还有一个同步连接器，用于端接FIP同步电缆。它需要使用配套的Molex连接器，目录号为#39-01 -4031。该模块带有LED状态指示器，如CD1和CD2,用于描述每个通道上的载波检测状态。EN1和EN2是传输指示灯，指示通信端口。上的活动数据交换。IC693BEM330兼容性不仅限于90-30系列PLC，因为它还支持90-70系列平台、通过FIP总线接C单元(BIU)的现场控制站、远程I/O点以及通用设备，如支持FIP通信协议的通用设备和第三方设备。

IC693BEM330是一款由GE公司提供的电源模块。它具有耗电小及关闭电源功能，这意味着它的静态电流非常小，一般为几十μA到几百μA，甚至有一些微功耗的线性稳压器其静态电流仅1.1μA。此外，该电源模块还具有关闭电源控制端功能，当关闭电源状态时，其自身的耗电大约在1μA左右。这种功能使得一部分电路在不工作时可以关闭，从而大大节省电能。

IC693BEM330模块的工作电压有多种选择，如2.0V、2.5V、2.7V等，也有一些工作电压为5V，还有少数为12V或28V的特殊用途电压源。这使得它能够适应不同的设备和应用需求。

总的来说，IC693BEM330是一款高效、节能的电源模块，适用于各种需要稳定、可靠电源供应的工业自动化和控制系统。

IC693BEM330 支持I厂仪器协议(FIP)的远程I/O扫描仪模块

The IC693BEM330 is a remote I/O scanner module that supports the Factory I Instrument Protocol (FIP). The module belongs to the 90-30 series of programmable logic controllers (PLCS), formerly manufactured by GE Fanuc and now owned by Emerson Automation. It is primarily used to implement a distributed I/O architecture, enabling users to communicate with I/O modules far from the host controller. The module supports the FIP l/O protocol and supports 1 MHz data transfer rate. It is equipped with two (2) FIP channels, provided by a 9-pin D-housing female connector. It also has a sync connector for terminating the FIP sync cable. It requires the use of the accompanying Molex connector, catalog number # 39-01-4031. The module comes with LED status indicators, such as CD1 and CD2, to describe the carrier detection status on each channel. EN1 and EN2 are transmission indicators that indicate the communication port. Activity data exchange on. IC693BEM330 compatibility is not limited to 90-30 series PLCS, as it also supports 90-70 series platforms, field control stations connected to C units (BIUs) via FIP bus, remote I/O points, and general-purpose devices such as general-purpose devices that support FIP communication protocols and third-party devices.

The IC693BEM330 is a power module provided by GE. It has a small power consumption and power off function, which means that its static current is very small, generally tens of μA to hundreds of μA, and even some micro-power linear regulators have a static current of only 1.1μA. In addition, the power module also has the function of turning off the power control terminal, when the power state is turned off, its own power consumption is about 1μA. This function allows a part of the circuit to be turned off when it is not working, which greatly saves power.

The operating voltage of the IC693BEM330 module has a variety of options, such as 2.0V, 2.5V, 2.7V, etc., there are also some operating voltages of 5V, and a few special purpose voltage sources for 12V or 28V. This allows it to adapt to different device and application needs.

Overall, the IC693BEM330 is an efficient and energy efficient power module for a wide range of industrial automation and control systems that require a stable and reliable power supply.