IC693MDL734 正逻辑/负逻辑和 1 安培输出的 125 伏直流模块

描述

IC693MDL734 正逻辑/负逻辑和 1 安培输出的 125 伏直流模块

IC693MDL734 是一款具有正逻辑/负逻辑和 1 安培输出的 125 伏直流模块，是 GE Fanuc Automation 制造的系列 90-30 可编程逻辑控制器的组件。该模块提供 6 个带电源输出端子的隔离点输出。该设计的双重特性为用户提供了使用正逻辑（其中电流来自公共用户或正供电终端总线）或负逻辑（其中电流来自公共用户负载或负供电终端总线）的选项。该模块具有正逻辑和负逻辑选项，可与各种输出设备兼容。现场设备使用兼容的用户提供的电源运行。

为了传达每个输出电路的ON/OFF状态，每个点都有相应的LED指示灯。所有这些 LED 指示灯均位于模块的顶部表面。LED 灯排列成两行。六个 ON/OFF 状态指示灯为绿色，位于第一行，标记为 A1 至 A6。电路布线位于模块门板的内表面，而识别电压类型的信息则位于另一侧。IC693MDL734是高压模块，如插入件左侧边缘附近标记的红色颜色编码方案所示。该嵌件安装在门板的内表面和外表面之间。建议设置外部熔断器。

系列 90-30 PLC 系统包含在 5 插槽基板或 10 插槽基板中。IC693MDL734 可以安装到任何 I/O 插槽中。IC693MDL734 的额定电压为 125 VDC，有 6 个隔离输出，活动时每点最大输出电流为 1mA。IC693MDL734 上的所有输出均通过 5 伏电源消耗 90mA 功耗。

技术规格
额定电压： 125伏直流电
输出数量： 6（孤立）
频率： 不适用
输出负载： 每点 1.0 安培
输出电压范围： -10.8 至 +150 伏直流电
直流电源： 是的

IC693MDL734 正逻辑/负逻辑和 1 安培输出的 125 伏直流模块

The IC693MDL734 is a 125-volt DC module with positive/negative logic and 1 amp output and is part of a series of 90-30 programmable logic controllers manufactured by GE Fanuc Automation. The module provides 6 isolated point outputs with power output terminals. The dual nature of the design gives the user the option of using either positive logic (where the current comes from a public user load or a positive powered terminal bus) or negative logic (where the current comes from a public user load or a negative powered terminal bus). The module has positive and negative logic options and is compatible with various output devices. Field equipment runs on a compatible user-supplied power supply.

In order to convey the ON/OFF status of each output circuit, each point has a corresponding LED indicator. All of these LED indicators are located on the top surface of the module. The LED lights are arranged in two rows. The six ON/OFF status indicators are green and located in the first row, labeled A1 to A6. The circuit wiring is located on the inner surface of the module door panel, while the information identifying the voltage type is located on the other side. The IC693MDL734 is a high voltage module, as indicated by the red color coding scheme marked near the left edge of the insert. The insert is installed between the inner and outer surfaces of the door panel. An external fuse is recommended.

The series 90-30 PLC system is included in either a 5-slot substrate or a 10-slot substrate. The IC693MDL734 can be installed into any I/O slot. The IC693MDL734 is rated at 125 VDC and has 6 isolated outputs with a maximum output current of 1mA per point when active. All outputs on the IC693MDL734 consume 90mA via a 5 volt supply.

Technical specification
Rated voltage: 125 volts DC
Output quantity: 6 (isolated)
Frequency: Not applicable
Output load: 1.0 amps per point
Output voltage range: -10.8 to +150 volts DC
Dc power supply: Yes