IC694MDL752 每个输出点能够吸收25mA的最大电流

描述

IC694MDL752 每个输出点能够吸收25mA的最大电流

IC694MDL752 是GE Fanuc Rx3i系列的一个32点、5/12 VDC (TTL) 的负逻辑输出模块。这意味着该模块提供了32个离散TTL电压阈值的输出点，且这些输出为负逻辑。每个输出点能够吸收25mA的最大电流。

在工业自动化和控制系统中，输出模块扮演着将控制器的数字信号转换为实际驱动现场设备的模拟或数字信号的角色。负逻辑输出意味着当输出点处于激活状态时，它会输出低电平（通常是0V），而当它处于非激活状态时，它会输出高电平（通常是5V或12V）。

IC694MDL752的具体应用可能包括驱动电磁阀、电机、指示灯等现场设备。由于它具有32个输出点，因此可以同时驱动多个设备，提高了系统的控制能力和效率。

此外，该模块还具有高可靠性和稳定性，适用于各种恶劣的工业环境。它还支持多种通信协议和接口，可以方便地与其他设备或系统进行数据交换和通信。

需要注意的是，具体的配置和使用方法可能会因不同的应用场景和控制系统而有所不同。因此，在选择和使用IC694MDL752模块时，建议参考相关的技术手册和文档，以了解其在特定应用中的具体作用和配置要求。

IC694MDL752 每个输出点能够吸收25mA的最大电流

The IC694MDL752 is a 32-point, 5/12 VDC (TTL) negative logic output module in the GE Fanuc Rx3i family. This means that the module provides 32 output points for discrete TTL voltage thresholds, and these outputs are negative logic. Each output point can absorb a maximum current of 25mA.

In industrial automation and control systems, the output module plays the role of converting the digital signal of the controller into the analog or digital signal that actually drives the field equipment. A negative logic output means that when the output point is active, it outputs a low level (usually 0V), and when it is inactive, it outputs a high level (usually 5V or 12V).

Specific applications of the IC694MDL752 may include driving field devices such as solenoid valves, motors, and indicators. Because it has 32 output points, it can drive multiple devices at the same time, improving the control ability and efficiency of the system.

In addition, the module has high reliability and stability, suitable for a variety of harsh industrial environments. It also supports a variety of communication protocols and interfaces to facilitate data exchange and communication with other devices or systems.

It should be noted that the specific configuration and use method may vary according to different application scenarios and control systems. Therefore, when selecting and using the IC694MDL752 module, it is recommended to refer to the relevant technical manuals and documentation to understand its specific role and configuration requirements in a specific application.