IC698ETM001 为RX7i控制系统提供高性能以太网通信

Description

IC698ETM001 为RX7i控制系统提供高性能以太网通信

IC698ETM001 是GE 以太网接口模块，为RX7i控制系统提供高性能以太网通信。它的以太网处理速度为 200 MHz。电源工作电压为 +5 VDC，电流消耗最大为 1.5 (+5 VDC)。IC698ETM001 还提供与其他 GE 智能平台控制系统和主机的 TCP/IP 通信，并带有与 GE 智能平台控制器进行以太网通信的软件。

IC698ETM001 的精选功能包括提供完整的配置和编程服务以及通过以太网全局数据 (EGD) 进行间歇性数据交换。该模块提供 EGD 2 类功能或命令以及可靠数据服务 (RDS)，以确保正确传达命令消息。该模块配备了全面的站管理以及诊断工具和扩展连接。由于内部网络交换机，全双工端口提供自动协商网络速度和交叉检测。

IC698ETM001模块的冗余 IP 寻址允许将单独的 IP 地址分配给两个不同控制器中的两个以太网模块。除了每个接口的原始 IP 地址之外，还配置了该地址。主用单元以太网接口是唯一可以使用冗余 IP 的接口。注意：用户必须确认网关IP地址已配置。

IC698ETM001 为RX7i控制系统提供高性能以太网通信

The IC698ETM001 is a GE Ethernet interface module that provides high-performance Ethernet communication for RX7i control systems. It has an Ethernet processing speed of 200 MHz. The operating voltage of the power supply is +5 VDC, and the maximum current consumption is 1.5 (+5 VDC). The IC698ETM001 also provides TCP/IP communication with other GE Intelligent Platform control systems and hosts, and comes with software for Ethernet communication with GE Intelligent Platform controllers.

Selected features of the IC698ETM001 include full configuration and programming services and intermittent data exchange over Ethernet Global Data (EGD). This module provides EGD Class 2 functions or commands as well as Reliable Data Services (RDS) to ensure that command messages are communicated correctly. The module is equipped with comprehensive station management as well as diagnostic tools and extended connections. Thanks to the internal network switch, the full duplex port provides automatic negotiation of network speed and cross detection.

The redundant IP addressing of the IC698ETM001 module allows separate IP addresses to be assigned to two Ethernet modules in two different controllers. This address is configured in addition to the original IP address of each interface. The master unit Ethernet interface is the only interface that can use redundant IP. Note: The user must confirm that the gateway IP address is configured.