IS200WNPSH1ABA 涡轮控制模块

描述

IS200WNPSH1ABA 涡轮控制模块

IS200WNPSH1ABA是一款由GE工业驱动系统制造的PCB（印刷电路板）。这款电路板在应用程序中充当子板，具有两个连接器端口，可以连接电缆。

IS200WNPSH1ABA的形状为矩形，其两个表面都装有组件。其底面有一个背板连接器（P1），具有48个公脚，后表面还标记有RA/00。此外，其前表面有两个母插头连接器，分别标记为JE1和JE2，它们并排放置在电路板的右侧。

在前表面，IS200WNPSH1ABA还配备了一个单金属氧化物压敏电阻。这种压敏电阻的电阻值会随着外加电压的改变而变化。此外，电路板上还有16个熔断器（从TR1到TR16），它们分布在两行中，每行有8个。

在电路板底部，可以看到三行光器件，分别标识为D2、B2、Z2。这些组件和特性使得IS200WNPSH1ABA在工业自动化和控制系统中具有重要的功能。

请注意，为了安全和正确的使用，应始终参考相关的产品手册、技术文档和安全规范，以确保系统的正确配置和安全运行。如有需要，建议联系GE工业驱动系统或相关技术支持部门获取更多信息。

IS200WNPSH1ABA 涡轮控制模块

The IS200WNPSH1ABA is a printed circuit board (PCB) manufactured by GE Industrial Drive Systems. This board acts as a daughter board in the application and has two connector ports to connect cables.

The IS200WNPSH1ABA is rectangular in shape and has components on both surfaces. It has a backplane connector (P1) on the underside with 48 male pins, and the rear surface is also marked with RA/00. In addition, its front surface has two female plug connectors, labeled JE1 and JE2, which are placed side by side on the right side of the board.

On the front surface, the IS200WNPSH1ABA is also equipped with a single metal oxide varistor. The resistance value of this varistor will change with the change of applied voltage. In addition, there are 16 fuses on the board (from TR1 to TR16), which are distributed in two rows with eight in each row.

At the bottom of the circuit board, you can see three lines of optical devices, identified as D2, B2, and Z2. These components and characteristics make IS200WNPSH1ABA important in industrial automation and control systems.

Please note that for safe and correct use, you should always refer to the relevant product manuals, technical documentation and safety specifications to ensure the correct configuration and safe operation of the system. Contact GE Industrial Drive Systems or related technical support for more information.