购买咨询热线/Phone：
邮箱/Email：
地址：描述
IS220PTURH1A 通过组件编辑器在工具箱ST应用程序中启用或禁用
IS220PTURH1A是GE为其Mark VI系统开发的组件。Mark VI是GE发布的用于燃气/蒸汽轮机管理的最终Speedtronic系统之一。
IS220PTURH1A是一次汽轮机专用一次跳闸组件。该组件在汽轮机控制端子板和一个或两个以太网之间提供电气接口。该组件的输出通过连接到相关端子板的DC 62针连接器实现。
IS220PTURH1A采用黑色外壳，带有空气流通开口。这种情况下的前面有多个LED指示灯，以及一个IR(红外端口。)这个端口没有在这个包中使用。在这个外壳内，有一个处理器板、一个专用于涡轮机控制的第二块板和一个模拟采集辅助板。电池组安装在TTURH1C端子板上。
处理器板有两个10/100以太网端口、闪存和RAM、一个用于识别的只读芯片、一个内部温度传感器和一个复位电路。 IS220PTURH1A允许自动重新配置，自动从控制器下载到I/O包。重新配置包括基本加载、引导加载、固件和参数。要实现这一点，必须启用自动重新配置。这可以通过组件编辑器在工具箱ST应用程序中启用或禁用。
Mark VI系统开发的组件包括：
IS220UCSAH1A：通用电气为Mark VI系统创建的处理器/控制器。它具有HMI（人机界面），其软件专为运行重型涡轮机而设计，例如CIMPLICITY图形界面。它是一个单一的盒装组件，前面板允许连接通信，后边缘有两个螺钉安装。
IS220PTURH1A：主要涡轮机专用的主要跳闸包。该组件在涡轮机控制终端板和一个或两个以太网网络之间提供电气接口。该组的输出通过连接到相关端子板的DC-62引脚连接器进行。它采用黑色外壳，带有空气流通口。该外壳的正面有多个LED指示灯，以及一个IR（红外端口）。
IS220PTURH1A 通过组件编辑器在工具箱ST应用程序中启用或禁用
The IS220PTURH1A is a component developed by GE for its Mark VI system. The Mark VI is one of the final Speedtronic systems released by GE for gas/steam turbine management.
IS220PTURH1A is a single-trip assembly for a steam turbine. This component provides an electrical interface between the turbine control terminal board and one or two Ethernet cables. The output of this component is achieved through a DC 62-pin connector connected to the associated terminal board.
The IS220PTURH1A comes in a black housing with an air outlet. The front of this case has multiple LED indicators, as well as an IR(infrared port). This port is not used in this package. Inside this enclosure, there is a processor board, a second board dedicated to turbine control, and an analog acquisition auxiliary board. The battery string is installed on the TTURH1C terminal board.
The processor board has two 10/100 Ethernet ports, flash memory and RAM, a read-only chip for identification, an internal temperature sensor, and a reset circuit. The IS220PTURH1A allows automatic reconfiguration and automatically downloads I/O packages from the controller. Reconfiguration includes base load, boot load, firmware, and parameters. To do this, you must enable automatic reconfiguration. This can be enabled or disabled in the toolbox ST application through the Component editor.
The components developed by the Mark VI system include:
IS220UCSAH1A: a processor or controller created by General Electric for the Mark VI system. It has an HMI (Human machine interface) and its software is designed for running heavy duty turbines, such as the CIMPLICITY graphical interface. It is a single boxed assembly with a front panel that allows connection communication and a rear edge with two screws mounted.
IS220PTURH1A: Main trip package for main turbines. This component provides an electrical interface between the turbine control terminal board and one or two Ethernet networks. The output of this group is done via a DC-62 pin connector connected to the associated terminal board. It has a black housing with an air outlet. The front of the housing has multiple LED indicators, as well as an IR (infrared port).
购买咨询热线/Phone：18859254943- 邮箱/Email：sales@ygdcs.com
- 地址：成都高新区天益街北巷52号附14号2层
