JANCD-XCP01C-1 工业自动化控制器模块

Description

JANCD-XCP01C-1 工业自动化控制器模块

JANCD-XCP01C-1 是一款主板，特别地，它是安川（Yaskawa）MOTOMAN机器人所使用的主板。这款主板具有耗电小及关闭电源功能，其新型电源IC的静态电流较小，一般为几十μA到几百μA。此外，它还具有关闭电源控制端功能，可以在关闭电源状态时使IC自身耗电在1μA左右，从而大大节省电能。

在电源测试中，这款主板会经过多项重要测试，包括交叉负载、浪涌、输入电压、纹波噪音、输出短路、过功率、转换效率、功率因数、响应时间、时序、噪音、传导辐射、漏电流以及高低温测试等。其中，浪涌电流指的是电源接通瞬间流入电源设备的峰值电流，由于输入滤波电容迅速充电，这个峰值电流会远远大于稳态输入电流。

此外，相较于其他型号（如M-3），JANCD-XCP01C-1除了提升传送效率，还能进行设备的分散控制（支持模块化系统），支持IP通信，同时减少整体设备接线，方便进行数据的统一管理。

总的来说，JANCD-XCP01C-1主板是一款功能强大、性能稳定、经过严格测试的主板，适用于安川MOTOMAN机器人的各种应用场景。

JANCD-XCP01C-1 工业自动化控制器模块

The JANCD-XCP01C-1 is a motherboard, specifically one used by Yaskawa’s MOTOMAN robot. This motherboard has a small power consumption and power off function, and the static current of its new power supply IC is small, generally tens of μA to hundreds of μA. In addition, it also has the function of turning off the power control terminal, which can make the IC itself consume about 1μA when the power is turned off, thus greatly saving power.

In power testing, the motherboard undergoes several important tests, including cross-load, surge, input voltage, ripple noise, output short circuit, overpower, conversion efficiency, power factor, response time, timing, noise, conducted radiation, leakage current, and high and low temperature tests. Among them, the surge current refers to the peak current flowing into the power supply device at the moment the power is turned on. Because the input filter capacitor is rapidly charged, the peak current will be much greater than the steady input current.

In addition, compared with other models (such as M-3), the JANCD-XCP01C-1 can not only improve transmission efficiency, but also enable decentralized control of the equipment (supporting modular systems), support IP communication, and reduce the overall device wiring to facilitate unified data management.

Overall, the JANCD-XCP01C-1 motherboard is a powerful, stable and rigorously tested motherboard suitable for various application scenarios of Yaskawa MOTOMAN robots.