MPL-B540K-SJ24AAA 紧凑型伺服

Description

MPL-B540K-SJ24AAA 紧凑型伺服

罗克韦尔自动化165毫米MP低惯性交流电机是一个4000转/分钟的紧凑型伺服。它具有单个Turn (hyperface协议)编码器反馈。这种交流同步伺服电机配备了24伏直流电制动器在电机，如果需要制动。此外，这款智能伺服装置还配备了圆形卡口电缆连接器，这些连接器安装在这款交流伺服电机上，额定电压为230V AC。这款MPL系列无刷电机的长度为4英寸。

来自Allen-Bradley的MPL-B540K-SJ24AA伺服电机是一种165毫米帧长度的交流电机。它的额定转速是4000转，它属于MPL系列从艾伦-布拉德利。MPl系列的低惯量电机可支持高达8000 rpm的额定转速，0.16至18.6千瓦的输出功率，2.3至1440磅的连续失速扭矩和6.6至2460磅的峰值失速扭矩。MPL-B540K-SJ24AA伺服电机的输入额定值是400伏交流电。伺服电机的大约重量是33磅。额定输出功率5.4千瓦。转子惯量为0.014 lb-in-s2。MPL-B540K-SJ24AA伺服电机的峰值扭矩和连续失速扭矩规格分别为420磅/英寸和172磅/英寸。

MPL-B540K-SJ24AA伺服电机的磁体堆叠长度为101.6毫米。对于反馈，伺服电机带有1024 sin/cos绝对单转编码器。这个集成的编码器支持Hiperface协议。额外的伺服电机功能包括圆形卡口连接器，轴键，24伏直流制动器和IEC公制法兰。如果需要轴密封，则需要从Allen-Bradley订购可选的密封套件。安装轴密封的优点包括防止细颗粒和水分，减少电机轴承的磨损。轴封应使用轴封套件附带的润滑剂润滑。由于轴封容易磨损，建议定期检查。根据其状况，轴封的更换频率可以从3个月到12个月不等。由第三方制造的轴密封套件不应与艾伦-布拉德利电机一起使用。

MPL-B540K-SJ24AAA

MPL-B540K-SJ24AAA 紧凑型伺服

This Rockwell Automation 165 millimeter MP low inertia AC motor is a 4000 RPM compact servo. It features a single Turn (hyperface protocol) encoder feedback. This AC synchronous servo motor comes with a 24 VDC brake in the motor if braking is required. Additionally, this smart servo is equipped with circular bayonet cable connectors that are built onto this AC servo motor and comes with voltage rating of 230V AC. This MPL Series brushless motor in addition has a length of 4 in.

The MPL-B540K-SJ24AA servo motor from Allen-Bradley is an AC motor with a 165-millimeter frame length. Its rated speed is 4000 rpm and it belongs to MPL series from Allen-Bradley. Low-inertia motors from MPl series can support up to 8000 rpm of rated speed, 0.16 to 18.6 kilowatts of output power, 2.3 to 1440 pounds on an inch of continuous stall torque and 6.6 to 2460 pounds on an inch of peak stall torque. The input rating of the MPL-B540K-SJ24AA servo motor is 400 Volts AC. The approximate weight of the servo motor is 33 pounds. The output power rating is 5.4 kilowatts. The rotor inertia is 0.014 lb-in-s2. The specifications for the peak and continuous stall torque for the MPL-B540K-SJ24AA servo motor are 420 pounds on an inch and 172 pounds on an inch, respectively.

The magnet stack length for the MPL-B540K-SJ24AA servo motor is 101.6 millimeters. For feedback, the servo motor comes with a 1024 sin/cos absolute single-turn encoder. This integrated encoder supports the Hiperface protocol. Additional servo motor features include a circular bayonet connector, a shaft key, a 24 Volts DC brake, and an IEC metric flange. If a shaft seal is required, an optional seal kit will need to be ordered from Allen-Bradley. The advantages of installing a shaft seal include protection from fine particles and moisture, reducing wear and tear on the motor bearings. The shaft seals should be lubricated with the lubricant which comes with the shaft seal kits. Because shaft seals are subject to wear, periodic inspection is recommended. Depending on their condition, the replacement frequency for shaft seals can vary from 3 months to 12 months. Shaft seal kits made by third parties should not be used with Allen-Bradley motors.