MVME162 嵌入式控制器

Description

MVME162 嵌入式控制器

MVME162 嵌入式控制器

Settings:
•25 MHz MC68LC040 microprocessor
•4mb DRAM
•128kb sram
•1mb flash memory
•(2)IndustryPack Ports
•(1) The BIOS chip has been installed
SCSI bus interface with 32-bit local bus burst DMA

Part Number :01-W3866B 43B
Subcard Part number :01-W3913B 02A

Instrument grounding:
To reduce the risk of electric shock, the chassis and shell of the device must be grounded. The device comes with a three-core AC power cable. The power cord must be plugged into an approved three-contact power outlet or used with a three-contact to two-contact adapter, with the ground cable (green) firmly connected to the electrical ground (safety ground) of the power outlet. The power jack and mating plug of the power cord comply with International Electrotechnical Commission (IEC) safety standards.

Do not operate in an explosive environment
Do not operate the device in an environment with combustible gas or smoke. Operating any electrical equipment in such an environment poses a clear safety hazard.

Away from live circuit
The operator shall not remove the equipment cover. Only factory authorized maintenance personnel or other qualified maintenance personnel may remove the equipment cover for internal component or part replacement or any internal adjustment. Do not replace components connected to power cables. In some cases, there may be dangerous voltages even if the power cord is unplugged. To avoid injury, disconnect the power supply and discharge circuit before touching.