NT-50-DP-EN PROFIBUS DP 到以太网的网关

Description

NT-50-DP-EN PROFIBUS DP 到以太网的网关

经济的入门级网关，用于简单转换
将PROFIBUS DP从站集成到以太网中，反之亦然

I/O 数据转换时间很短，不到 20 ms

紧凑型设计，节省空间

可加载固件允许灵活使用 – 也适用于双从站转换

通过以太网提供诊断和配置接口

netTAP 50 连接到通信网络，并作为一个网关，用于在一个实时以太网协议(1 端口)和一个现场总线协议或一个串行自动化协议之间以及在一个现场总线协议和一个串行自动化协议之间进行简单转换。 netTAP 50 支持 Slave-zu-Slave 和 Slave-zu-Master-conversions。作为主设备，netTAP 50 仅提供一个具有完整主设备功能的单台从设备。这便于用户将单个现场设备集成到任何更高级别的网络中。

netTAP 50 的设计以其紧凑的硬件而令人信服，并简化为协议转换器的基本要求。转换器针对要素成本优先的细分市场，这使得 netTAP 50 成为极具价格吸引力且普遍适用的网关，提供多种转换选项。

NT-50-DP-EN

NT-50-DP-EN PROFIBUS DP 到以太网的网关

Economical entry level gateway for simple conversions
Integrate PROFIBUS DP from station to Ethernet and vice versa

I/O data conversion time is very short, less than 20 ms

Compact design saves space

Loadable firmware allows for flexible use – also suitable for dual slave conversion

Provides diagnostic and configuration interfaces over Ethernet

netTAP 50 connects to a communication network and acts as a gateway for simple conversion between a real-time Ethernet protocol (1-port) and a fieldbus protocol or a serial automation protocol, and between a fieldbus protocol and a serial automation protocol. netTAP 50 supports Slave-zu-Slave and Slave-zu-Master-conversions. As a master device, netTAP 50 provides only a single slave device with full master device functionality. This makes it easy for users to integrate a single field device into any higher-level network.

The design of the netTAP 50 is compelling for its compact hardware and simplifies to the basic requirements of a protocol converter. Converters target factor cost-first segments, making netTAP 50 an attractive and universally applicable gateway with multiple conversion options.