P30B04010PCKSTA01 输出功率范围通常在0.1kW到75kW之间

Description

P30B04010PCKSTA01 输出功率范围通常在0.1kW到75kW之间

交流伺服电机，P30B04010PCKSTA01是一种将电能转变为机械能的机器，主要由一个用以产生磁场的电磁铁绕组或分布的定子绕组和一个旋转电枢或转子组成。它利用通电线圈在磁场中受力转动的现象而制成，包括交流异步伺服电动机和交流同步伺服电动机。

此外，伺服电机内部的转子是永磁铁，驱动器控制的U/V/W三相电形成电磁场，转子在此磁场的作用下转动，同时电机自带的编码器反馈信号给驱动器，驱动器根据反馈值与目标值进行比较，调整转子转动的角度。

交流伺服电机是指用于控制机械设备的电动机，其输出功率范围通常在0.1kW到75kW之间。P30B04010PCKSTA01与直流伺服电机相比，交流伺服电机具有以下优势：
– 控制性能：直流伺服电机的速控精准，转矩速度特性很硬，良好的线性调节；交流伺服电机的配置速度特性良好，平滑控制，几乎无震荡，恒力矩输出。
– 安全性：直流伺服电机的宫殿电压低于人身安全电压，搭配蓄电池可以户外移动使用；交流伺服电机的常规供电为220V和380V，一般在工厂的车间使用。
– 应用场合：直流伺服电机主要应用在地铁、打机、医疗设备、物流运输、atv、送餐机器人等领域；交流伺服电机主要应用在印刷设备、机床设备、机械手、自动化生产线、焊接设备等场合。

P30B04010PCKSTA01 输出功率范围通常在0.1kW到75kW之间

Ac servo motor, P30B04010PCKSTA01 is a machine that converts electrical energy into mechanical energy, mainly consisting of an electromagnet winding or distributed stator winding used to generate a magnetic field and a rotating armature or rotor. It is made of the phenomenon that the energized coil is forced to rotate in the magnetic field, including AC asynchronous servo motor and AC synchronous servo motor.

In addition, the rotor inside the servo motor is a permanent magnet, the U/V/W three-phase electric field controlled by the driver, the rotor rotates under the action of this magnetic field, while the motor comes with the encoder feedback signal to the driver, the driver according to the feedback value compared with the target value, adjust the rotor rotation Angle.

Ac servo motor refers to the electric motor used to control mechanical equipment, its output power range is usually between 0.1kW and 75kW. P30B04010PCKSTA01 AC servo motors have the following advantages over DC servo motors:
– Control performance: DC servo motor speed control is accurate, torque speed characteristics are very hard, good linear regulation; Ac servo motor configuration speed characteristics are good, smooth control, almost no shock, constant torque output.
– Safety: the palace voltage of DC servo motor is lower than the personal safety voltage, and it can be used outdoors with batteries; The conventional power supply of AC servo motor is 220V and 380V, which is generally used in the workshop of the factory.
– Application: DC servo motor is mainly used in subway, machine, medical equipment, logistics transportation, atv, food delivery robot and other fields; Ac servo motor is mainly used in printing equipment, machine tool equipment, manipulator, automatic production line, welding equipment and other occasions.