PFVI401 Millmate控制器400

Description

PFVI401 Millmate控制器400

Millmate Controller 400的设计提供了许多功能，同时具有高度的用户友好性。

mc400涵盖了大多数机械装置。这意味着用户只需要按照一步一步的说明，以便设置控制器，并获得正确的轧制力测量。

预定义的标准测量模式
内置测压元件表
过滤时间从1到2000毫秒
易于配置的模拟/数字输入/输出
水平传感器
一步探测器
单位选择(N, kN, MN, kp, t, lb, t)
自诊断测试系统，包括换能器测试

数据
外部连接:负载传感器的激励电流
2或4模拟输入称重传感器信号
4个模拟输出，电压或电流
8个数字输入控制信号
8个数字输出
+24 V外部电源，最大。0.5
用于服务和多个控制单元的以太网连接
2个RS-232串行接口，用于外部显示、控制等。
1个RS-485型串行接口，用于外部显示
高速Profibus(可选)

PFVI401

PFVI401 Millmate控制器400

Millmate Controller 400 has been designed to offer a lot of functionalities and at the same time a high degree of user-friendliness.

MC 400 covers most mechanical arrangements. This means the user only has to follow the step-by-step instructions in order to set up the controller and to obtain correct roll force measurement.

Predefined standard measurement modes
Built-in load cell tables
Filter times from 1 up to 2000 ms
Easily configurable analog/digital inputs/outputs
Level detector
Step detector
Unit selection (N, kN, MN, kp, t, lb, T)
Self-diagnostic test system including transducer test

Data
External connections:
Excitation current to load cells
2 or 4 analog inputs for load cell signals
4 analog outputs, voltage or current
8 digital inputs for control signals
8 digital outputs
+24 V supply for external units, max. 0.5 A
Ethernet connection for service and multiple control units
2 serial interfaces of type RS-232 for external displays, control, etc.
1 serial interface of type RS-485 for external display
High-speed Profibus (optional)