PLM3900N TRICONEX 数字输入/输出模块 成都阳光熹禾

Description

产品细节说明：PLM3900N TRICONEX 数字输入/输出模块

功能：

• 数字信号采集与控制：PLM3900N模块通过其输入通道和输出通道与外部数字信号进行连接，实现数字信号的采集、传输和控制。
• 接收外部信号：用于接收外部开关量或数字信号，如检测开关状态、按钮按下、传感器信号等。
• 控制外部设备：通过改变输出通道的状态，可以控制外部设备的开关状态，如继电器、开关等。

应用场景：

• 自动化生产线控制：在自动化生产线中，PLM3900N模块可以接收来自传感器的信号，检测物料的位置、温度、压力等参数，并根据这些参数执行相应的控制操作。
• 安全仪表系统（SIS）：作为Trident系统的一部分，PLM3900N模块支持最高安全完整性等级3（SIL3）的安全应用，确保在极端条件下系统的稳定性和可靠性。

PLM3900N

产品详情参数 ：PLM3900N TRICONEX 数字输入/输出模块

• 输入通道：将外部信号转换为电压或电流的高或低电平，然后传递给控制系统。
• 输出通道：将PLC的内部信号电平转化为控制过程所需的外部信号电平，同时实现隔离和功率放大的作用。
• 高可靠性：PLM3900N模块采用故障安全和容错架构，最大限度地提高了系统的可用性，并符合IEC 61508:2010等国际安全标准。
• 宽温范围：该模块能在极端环境温度条件下运行，从低至-20°C到高至+70°C，同时能抵御腐蚀环境，确保在各种恶劣环境下的稳定运行。
• 行业协议支持：支持多种行业协议，如Modbus TCP/IP、RS485 Modbus、OPC UA等，便于与其他设备和系统的集成。
• 纵深防御：PLM3900N模块支持“纵深防御”方法，以确保系统免受网络攻击的威胁，提高了系统的安全性。

PLM3900N TRICONEX 应用领域：

PLM3900N TRICONEX是一款功能强大、可靠性高的数字输入/输出模块，广泛应用于工业自动化、控制系统和电子设备中。其高可靠性、宽温范围、行业协议支持和纵深防御等特点，使其成为工业自动化领域的优选产品。

Product details: PLM3900N TRICONEX digital input/output module

Function:

Digital signal acquisition and control: The PLM3900N module is connected to external digital signals through its input and output channels to achieve the acquisition, transmission, and control of digital signals.
Receiving external signals: Used to receive external switch or digital signals, such as detecting switch status, button pressing, sensor signals, etc.
Control external devices: By changing the status of the output channel, the switch status of external devices, such as relays and switches, can be controlled.

Application scenario:

Automated production line control: In an automated production line, the PLM3900N module can receive signals from sensors, detect parameters such as material position, temperature, and pressure, and perform corresponding control operations based on these parameters.
Safety Instrumented System (SIS): As part of the Trident system, the PLM3900N module supports safety applications up to the highest Safety Integrity Level 3 (SIL3), ensuring system stability and reliability under extreme conditions.
Product details and parameters: PLM3900N TRICONEX digital input/output module
Input channel: converts external signals into high or low levels of voltage or current, and then transmits them to the control system.
Output channel: converts the internal signal level of the PLC into the external signal level required for the control process, while achieving isolation and power amplification.
High reliability: The PLM3900N module adopts a fault safe and fault-tolerant architecture, maximizing system availability and complying with international safety standards such as IEC 61508:2010.
Wide temperature range: This module can operate under extreme environmental temperature conditions, from low to -20 ° C to high to+70 ° C, while also resisting corrosive environments, ensuring stable operation in various harsh environments.
Industry protocol support: Supports multiple industry protocols such as Modbus TCP/IP, RS485 Modbus, OPC UA, etc., facilitating integration with other devices and systems.
Defense in Depth: The PLM3900N module supports the “defense in depth” method to ensure that the system is not threatened by network attacks and improves system security.
PLM3900N TRICONEX application areas:

PLM3900N TRICONEX is a powerful and highly reliable digital input/output module widely used in industrial automation, control systems, and electronic devices. Its high reliability, wide temperature range, industry protocol support, and deep defense make it a preferred product in the field of industrial automation.

其他型号推荐：PLM3900N TRICONEX 数字输入/输出模块