PM866K01 3BSE050198R1 ABB 控制器单元

描述

CPU板包含微处理器和RAM内存、实时时钟、LED指示灯、 INIT按钮和CompactFlash接口。PM866 / PM866A控制器的底板上有2个RJ45以太网接口(CN1、CN2)和2个RJ45串口(COM3、COM4), 于连接到控制网络。中-个串口(COM3)是带有调制解调器控制信号的RS-232C端口，而另一个端口(COM4)是隔离的，用于连接配置工具。控制器支持CPU冗余,提供更高的可用性(CPU、cex总线、 通信接口和S800 /0)。简单的DIN导轨连接/分离程序，使用独特的滑动和锁定机制。所有的底板都有一个唯一的以太网地址，它为每个CPU提供了-个硬件标识。该地址可以在TP830底板上的以太网地址标签上找到。
特点和优点
ISA安全认证-了解更多
可靠性和简单的故障诊断程序
模块化，允许逐步扩展
IP20级防护，不需要外壳
控制器可以配置800xA控件构建器
控制器通过EMC全认证
cex总线采用一对BC810 / BC820
基于最佳通信连接标准的硬件(以太网，PROFIBUS DP等)
内置冗余以太网通信端口

PM866K01 3BSE050198R1

The CPU board includes a microprocessor and RAM memory, real-time clock, LED indicators, INIT button, and CompactFlash interface. The PM866/PM866A controller has two RJ45 Ethernet interfaces (CN1, CN2) and two RJ45 serial ports (COM3, COM4) on the backplane, which are connected to the control network. The middle serial port (COM3) is an RS-232C port with a modem control signal, while the other port (COM4) is isolated and used to connect configuration tools. The controller supports CPU redundancy and provides higher availability (CPU, CEX bus, communication interface, and S800/0). Simple DIN rail connection/separation program, using unique sliding and locking mechanisms. All backplanes have a unique Ethernet address that provides a hardware identifier for each CPU. This address can be found on the Ethernet address label on the TP830 backplane.
Features and advantages
ISA Security Certification – Learn More
Reliability and simple fault diagnosis program
Modular, allowing for gradual expansion
IP20 level protection, no shell required
The controller can be configured with an 800xA control builder
The controller is fully certified by EMC
The cex bus adopts a pair of BC810/BC820
Hardware based on the best communication connection standards (Ethernet, PROFIBUS DP, etc.)
Built in redundant Ethernet communication ports