PP825A 用户可以通过该功能完成寻找机械坐标系参考点的操作

Description

PP825A 用户可以通过该功能完成寻找机械坐标系参考点的操作

运动控制器的操作面板是一个界面友好、交互方便的设备，PP825A允许用户以手动方式操作和监控运动轴的运动。在操作面板上，用户可以激活或取消激活DIS输出，选择执行连续速度移动、查找参考点、加载参考点偏移量、重新加载当前位置等命令。此外，操作面板还可以显示当前设备运行速度、位置和方向信息，监控到输入、输出点状态信息。

操作面板是运动控制器的一个重要组成部分，PP825A用于用户交互和控制运动轴。它友好地显示当前设备运行速度、位置和方向信息，以及输入、输出点状态信息。操作面板通常包括以下功能：
– 执行连续速度移动：用户可以设置目标速度和目标方向，然后点击“启动”按钮，使电机连续运转。
– 执行点动操作：点击“点动+”按钮执行正向点动命令，点击“点动-”按钮执行负向点动命令，点击时间超过0.5秒电机会加速到点动速度。
– 查找参考点：用户可以通过该功能完成寻找机械坐标系参考点的操作。
– 执行曲线：用户可以完成配制运动轨迹曲线的操作，并通过下拉列表选择已组态曲线的符号名，点击“执行”，运行指定曲线。
– 组态：用户可以通过该功能监控、修改存储在S7-200CPU数据块中的配置参数信息。修改过组态设置以后，只需要先点击“允许更新PLC中的轴组态”，再点击“写入”即可。

不同的运动控制器可能具有不同的操作面板设计和功能，PP825A具体操作可能因品牌和型号而异。如果你想要了解具体某一品牌或型号的运动控制器的操作面板。

PP825A 用户可以通过该功能完成寻找机械坐标系参考点的操作

The motion controller’s operation panel is a user-friendly, interactive device, and the PP825A allows users to manually operate and monitor the motion of the motion shaft. On the operation panel, you can activate or deactivate DIS output, and choose to run commands such as continuous speed move, find reference point, load reference point offset, and reload the current position. In addition, the operation panel can also display the running speed, position, and direction of the current device, and monitor the status of the input and output points.

The operation panel is an important part of the motion controller, and the PP825A is used for user interaction and control of the motion axis. It kindly displays the current device running speed, position and direction information, as well as input and output point status information. The operation panel usually includes the following functions:
– Perform continuous speed movement: The user can set the target speed and target direction, and then click the “start” button to make the motor run continuously.
– Click the “click +” button to execute the forward click command, and click the “click -” button to execute the negative click command. If the click time exceeds 0.5 seconds, the motor will accelerate to the point speed.
– Find reference points: The user can complete the operation of finding the reference points of the mechanical coordinate system through this function.
– Execution curve: Users can complete the operation of formulating motion trajectory curves, select the symbol name of the configured curve from the drop-down list, and click “Execute” to run the specified curve.
– Configuration: Allows you to monitor and modify the configuration parameters stored in the S7-200CPU data block. After modifying the configuration Settings, just click “Allow to update the axis configuration in the PLC” and then click “Write”.

Different motion controllers may have different operating panel designs and functions, and PP825A operation may vary by brand and model. If you want to know the operation panel of a specific brand or model of motion controller.